View PS2707_159439.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DATA SHEET
PHOTOCOUPLER
PS2707-1,PS2707-2,PS2707-4
AC INPUT RESPONSE HIGH COLLECTOR TO EMITTER VOLTAGE TYPE -NEPOC SOP MULTI PHOTOCOUPLER SERIES
TM
Series-
DESCRIPTION
The PS2707-1, PS2707-2, PS2707-4 are optically coupled isolators containing GaAs light emitting diodes and an NPN silicon phototransistor. Each is mounted in a plastic SOP (Small Outline Package) for high density applications. This package has shield effect to cut off ambient light.
FEATURES
* AC input response * High collector to emitter voltage (VCEO = 120 V) * High isolation voltage (BV = 3 750 Vr.m.s.) * Small and thin (SOP) package * High-speed switching (tr, tf = 10 s TYP.) * Ordering number of taping product (1-ch only): PS2707-1-E3, E4, F3, F4 * UL approved: File No. E72422 (S) * VDE0884 approved (Option)
APPLICATIONS
* Hybrid IC * Telephone/FAX * FA/OA equipment * Programmable logic controllers
ORDERING INFORMATION
Part Number PS2707-1 PS2707-2 PS2707-4 PS2707-1-V PS2707-2-V PS2707-4-V Package 4-pin SOP 8-pin SOP 16-pin SOP 4-pin SOP 8-pin SOP 16-pin SOP VDE0884 specification products (Option) Safety Standard Approval Standard specification products * UL approved
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for availability and additional information.
Document No. P11311EJ5V0DS00 (5th edition) Date Published February 1999 NS CP(K) Printed in Japan
The mark * shows major revised points.
(c)
1988, 1999
PS2707-1,PS2707-2,PS2707-4
PACKAGE DIMENSIONS (in millimeters)
4.5 MAX.
PS2707-1 TOP VIEW
4 3 1. Anode, Cathode 2. Cathode, Anode 3. Emitter 4. Collector
1
2
7.00.3 4.4
1.3
2.3 MAX.
0.10.1
2.54 0.4 +0.10 -0.05
1.2 MAX. 0.25 M
0.15 +0.10 -0.05
2.0
0.50.3
PS2707-2
9.3 MAX. 8 7 6
TOP VIEW
5 1. 3. 2. 4. 5. 7. 6. 8. 1 2 3 4 7.00.3 4.4 1.3 Anode, Cathode Cathode, Anode Emitter Collector
2.3 MAX.
0.10.1
0.15 +0.10 -0.05
2.0
2.54 0.4 +0.10 -0.05 0.25 M
1.2 MAX.
0.50.3
PS2707-4
19.46 MAX.
16 15
TOP VIEW
14 13 12 11 10 9
1
2
3
4
5
6
7
8
1. 3. 5. 7. 2. 4. 6. 8. 9. 11. 13. 15. 10. 12. 14. 16.
Anode, Cathode Cathode, Anode Emitter Collector
7.00.3 4.4
1.3
2.3 MAX.
0.10.1
0.15 +0.10 -0.05
2.0
0.4 +0.10 -0.05
0.25 M
2.54
1.2 MAX.
0.50.3
2
Data Sheet P11311EJ5V0DS00
PS2707-1,PS2707-2,PS2707-4
ABSOLUTE MAXIMUM RATINGS (TA = 25 C, unless otherwise specified)
Ratings Parameter Symbol PS2707-1 PS2707-2, PS2707-4 50 0.8 80 1 120 6 30 1.5 150 3 750 -55 to +100 -55 to +150 1.2 120 Unit
Diode
Forward Current (DC) Power Dissipation Derating Power Dissipation Peak Forward Current
*1
IF
mA mW/C mW/ch A V V mA/ch mW/C mW/ch Vr.m.s. C C
PD/C
PD IFP VCEO VECO IC
Transistor
Collector to Emitter Voltage Emitter to Collector Voltage Collector Current Power Dissipation Derating Power Dissipation
PC/C
PC BV TA Tstg
Isolation Voltage
*2
Operating Ambient Temperature Storage Temperature
*1 PW = 100 s, Duty Cycle = 1 % *2 AC voltage for 1 minute at TA = 25 C, RH = 60 % between input and output
Data Sheet P11311EJ5V0DS00
3
PS2707-1,PS2707-2,PS2707-4
ELECTRICAL CHARACTERISTICS (TA = 25 C)
Parameter Diode Forward Voltage Terminal Capacitance Transistor Collector to Emitter Current Current Transfer Ratio (IC/IF) CTR Ratio
*1
Symbol VF Ct ICEO IF = 5 mA
Conditions
MIN.
TYP. 1.1 60
MAX. 1.4
Unit V pF
V = 0 V, f = 1 MHz IF = 0 mA, VCE = 120 V IF = 5 mA, VCE = 5 V IF = 1 mA, VCE = 5 V
100
nA
Coupled
CTR
50 10 0.3
150 80 1.0
400
%
CTR1/ CTR2 VCE (sat) RI-O CI-O tr tf
IF = 5 mA, VCE = 5 V IF = 10 mA, IC = 2 mA VI-O = 1 kVDC V = 0 V, f = 1 MHz VCC = 5 V, IC = 2 mA, RL = 1 k
3.0
Collector Saturation Voltage Isolation Resistance Isolation Capacitance Rise Time Fall Time
*2
0.3 10
11
V
0.4 10 10
pF
s
*2
*1 CTR1 = IC1/IF1, CTR2 = IC2/IF2
IF1 IF2 IC1 VCE IC2
*2 Test circuit for switching time
Pulse Input PW = 100 s Duty Cycle = 1/10 Input monitor 50 VOUT RL = 1 k IF VCC
4
Data Sheet P11311EJ5V0DS00
PS2707-1,PS2707-2,PS2707-4
TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise specified)
DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE
Transistor Power Dissipation PC (mW)
TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE
200
100
Diode Power Dissipation PD (mW)
75
150 PS2707-1 1.5 mW/C 100 PS2707-2, PS2707-4 1.2 mW/C 50
50
25
0
25
50
75
100
0
25
50
75
100
Ambient Temperature TA (C)
Ambient Temperature TA (C)
FORWARD CURRENT vs. FORWARD VOLTAGE
100 80 60
Forward Current IF (mA)
FORWARD CURRENT vs. FORWARD VOLTAGE
10
Forward Current IF (mA)
TA = +100 C +75 C +50 C
40 20 0 -20 -40 -60
1
0.1
+25 C 0 C -25 C -55 C
0.01 0.6
0.8
1.0
1.2
1.4
1.6
-80 -1.6 -1.2 -0.8 -0.4
0
0.4
0.8
1.2
1.6
Forward Voltage VF (V)
Forward Voltage VF (V)
COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE
Collector to Emitter Dark Current ICEO (nA)
COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE
10 5
Collector Current IC (mA)
50 000 10 000 5 000 1 000 500 100 50 10 5 1 0.5 0.1 -60 -40 -20 0 20 40 60 80 100 VCE = 40 V 24 V 10 V
IF = 25 mA
10 mA 5 mA 2.5 mA
2 mA
1.5 mA 1 0.5 0.5 mA 1 mA
0.1 0.0
0.2
0.4
0.6
0.8
1.0
Ambient Temperature TA (C)
Collector Saturation Voltage VCE (sat) (V)
Data Sheet P11311EJ5V0DS00
5
PS2707-1,PS2707-2,PS2707-4
COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE
10 mA
5 mA 4 mA
Normalized Current Transfer Ratio CTR
10
1.2 1.0 0.8 0.6 0.4 0.2 0.0
Collector Current IC (mA)
6
IF =
8
3 mA
,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,
Normalized to 1.0 at TA = 25 C, IF = 5 mA, VCE = 5 V 25 50 75 100
NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE
4
2 mA
2
1 mA 0.5 mA 2 4 6 8 10
0
-50
-25
0
Collector to Emitter Voltage VCE (V)
Ambient Temperature TA (C)
CURRENT TRANSFER RATIO vs. FORWARD CURRENT
300 100 VCE = 5 V 250 200 150 100 50 0 0.1 0.1 10
SWITCHING TIME vs. LOAD RESISTANCE
VCC = 5V, IC = 2 mA tf tr td ts
Current Transfer Ratio CTR (%)
Switching Time t ( s)
0.5 1 5 10 50
10
1
100
1k
10 k
Forward Current IF (mA)
Load Resistance RL ()
SWITCHING TIME vs. LOAD RESISTANCE
1 000 IF = 5 mA, VCC = 5 V, CTR = 90 % 1.2 1.0
FREQUENCY RESPONSE
Switching Time t ( s)
Normalized Gain GV
100
tf
0.8 0.6 0.4 0.2 0.0 0.5
ts 10 tr 1 td
RL = 1 k 510 300 100
0.1
1
10
100
1
5
10
50 100
500
Load Resistance RL (k)
Frequency f (kHz)
6
Data Sheet P11311EJ5V0DS00
PS2707-1,PS2707-2,PS2707-4
LONG TERM CTR DEGRADATION
1.2 1.0
CTR (Relative Value)
0.8 0.6 0.4 0.2 0.0 IF = 1 mA, TA = 25 C IF = 5 mA, TA = 25 C IF = 20 mA, TA = 25 C IF = 20 mA, TA = 60 C
1
102
103 Time (Hr)
104
105
Remark The graphs indicate nominal characteristics.
Data Sheet P11311EJ5V0DS00
7
PS2707-1,PS2707-2,PS2707-4
TAPING SPECIFICATIONS (in millimeters)
Outline and Dimensions (Tape)
2.00.1 4.00.1
1.750.1
1.550.1
2.40.1
12.00.2
5.50.1
1.550.1 8.00.1
4.60.1
0.3
Tape Direction
PS2707-1-E3 PS2707-1-F3
PS2707-1-E4 PS2707-1-F4
Outline and Dimensions (Reel)
1.50.1 1.50.1
21.00.8
120
PS2707-1-E3, E4: 178 PS2707-1-F3, F4: 330
7.40.1
1.50.5
0
6.01
66
2.00.5
13.00.5
Packing: PS2707-1-E3, E4 900 pcs/reel PS2707-1-F3, F4 3 500 pcs/reel
6
12.4 +2.0 -0.0 18.4 MAX.
8
Data Sheet P11311EJ5V0DS00
PS2707-1,PS2707-2,PS2707-4
RECOMMENDED SOLDERING CONDITIONS
(1) Infrared reflow soldering * Peak reflow temperature * Time of temperature higher than 210 C * Number of reflows * Flux 235 C (package surface temperature) 30 seconds or less Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.)
Recommended Temperature Profile of Infrared Reflow
Package Surface Temperature T (C)
(heating) to 10 s 235 C (peak temperature) 210 C to 30 s 120 to 160 C 60 to 90 s (preheating)
Time (s)
Peak temperature 235 C or below
(2) Dip soldering * Temperature * Time * Number of times * Flux 260 C or below (molten solder temperature) 10 seconds or less One Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (3) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
Data Sheet P11311EJ5V0DS00
9
PS2707-1,PS2707-2,PS2707-4
SPECIFICATION OF VDE MARKS LICENSE DOCUMENT (VDE0884)
Parameter Application classification (DIN VDE 0109) for rated line voltages 300 Vr.m.s. for rated line voltages 600 Vr.m.s. Climatic test class (DIN IEC 68 Teil 1/09.80) Dielectric strength maximum operating isolation voltage Test voltage (partial discharge test, procedure a for type test and random test) Upr = 1.2 x UIORM, Pd < 5 pC Test voltage (partial discharge test, procedure b for random test) Upr = 1.6 x UIORM, Pd < 5 pC Highest permissible overvoltage Degree of pollution (DIN VDE 0109) Clearance distance Creepage distance Comparative tracking index (DIN IEC 112/VDE 0303 part 1) Material group (DIN VDE 0109) Storage temperature range Operating temperature range Isolation resistance, minimum value VIO = 500 V dc at TA = 25 C VIO = 500 V dc at TA MAX. at least 100 C Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) Package temperature Current (input current IF, Psi = 0) Power (output or total power dissipation) Isolation resistance VIO = 500 V dc at TA = 175 C (Tsi) Tstg TA CTI Symbol Speck Unit
IV III 55/100/21
UIORM Upr
710 850
Vpeak Vpeak
Upr
1 140
Vpeak
UTR
6 000 2 >5 >5 175 III a -55 to +150 -55 to +100
Vpeak
mm mm
C C
Ris MIN. Ris MIN.
10 11 10
12
Tsi Isi Psi Ris MIN.
150 200 300 10
9
C mA mW
10
Data Sheet P11311EJ5V0DS00
PS2707-1,PS2707-2,PS2707-4
[MEMO]
Data Sheet P11311EJ5V0DS00
11
PS2707-1,PS2707-2,PS2707-4
CAUTION
Within this device there exists GaAs (Gallium Arsenide) material which is a harmful substance if ingested. Please do not under any circumstances break the hermetic seal.
NEPOC is a trademark of NEC Corporation.
* The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. * No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document. * NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. * Descriptions of circuits, software, and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software, and information in the design of the customer's equipment shall be done under the full responsibility of the customer. NEC Corporation assumes no responsibility for any losses incurred by the customer or third parties arising from the use of these circuits, software, and information. * While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. * NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact an NEC sales representative in advance.
M7 98. 8

▲Up To Search▲

Price & Availability of PS2707

	To Download PS2707 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .